FC10 Product Specifications
|
Sensor |
Advanced electrochemical fuel cell sensor, specific to alcohol |
|
Test automation |
Single button operation |
|
Sampling system |
High precision electronic pump, no cocking required |
|
Sampling Modes |
Automatic or Manual sampling modes ensure a deep lung sample |
|
Range |
Detects breath alcohol levels between .000 and .400 BAC |
|
Unit of Measure |
Available in different units of measure |
|
Display |
Versatile Graphic LCD, with automatic backlight control sensor |
|
Response Time |
Result immediate on negative samples and under 6 seconds on positive sample |
|
Recovery Time |
Immediate on negative samples and within 30 seconds on positive sample. |
|
Audible Function |
Audible tones indicate the unit status, errors and test sequence |
|
Accuracy |
Meets DOT Specifications +/- .005 BrAC up to .100 BAC and +/- 5% above .100BrAC |
| Operating Temperature | 32°F to 105°F (0-40°C) |
| Data Storage | Stores last test result |
| Failure Detection | Controlled diagnostics ensure unit is fully operational before every test. Audible error indicator with text warning descriptions displayed |
| Mouthpiece | Disposable. novel design prevents contamination of instrument and subject |
| Accessories | Wrist strap included |
| Size | 1¼ x 2½ x 5 inches (30 x 67 x 124 mm) |
| Weight | ½ lb (230gms) |
| Calibration | Fully automated calibration using Wet bath or Dry Gas calibration. |
| Power Supply | 4 AA Alkaline Batteries. Automatic shut-off to eliminate wasted battery power. |
| Warranty | One Year; parts and labor |